KTA UNIVERSITY
Application of Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) in the Analysis of Coating Failures
March 2, 2018
For clear, magnified images and quick, targeted analyses of elemental composition, SEM-EDS is the method of choice. Introduction. A scanning electron microscope (SEM) can be ...
Read More →
Localized Assessment of Air Leakage in Building Air Barriers
February 23, 2018
ANSI/ASHRAE/IES Energy Standard 90.1-2010 and the 2012 International Energy Conservation Code require that building envelopes be designed to limit uncontrolled air leakage into and out ...
Read More →
KTA University Podcast #2 – Total Shop Painting vs. Shop & Field Painting
February 19, 2018
This 24- minute podcast also features Ken Trimber as moderator, while Doug Reardon advocates total shop painting and John Todd promotes shop painting with field ...
Read More →
Challenges with Adult Learning… Using Microlearning to Effectively Educate
February 16, 2018
Introduction Many employers and organizations seek training that is inexpensive, relevant to their industry/marketplace, focused on the goals of the employees as well as the ...
Read More →
Interior Pipe Coatings for Transporting Potable Water – Types and Considerations
February 9, 2018
Introduction Throughout most the world in developed countries, the public relies on access to a safe drinking water supply; something we frequently take for granted ...
Read More →
The Missing Piece: Collaborations Between Field Investigators and Laboratory Chemists
February 7, 2018
Chances are, you have seen at least one procedural cop drama over the years. These shows all tend to follow a fairly standard formula: the ...
Read More →
Coating Adhesion Testing using Knife/Tape Methods
February 2, 2018
Introduction Adhesion is an important physical characteristic of applied coating films and systems, and testing is frequently used as an indicator to whether an adequate ...
Read More →
Use of Overhead Cranes, Powered Industrial Trucks, and Slings – Risks of Unsafe Use and OSHA/ANSI Requirements for Training and Operation
January 26, 2018
Introduction Efficient handling of materials is vital to the steel fabricating and coating shop processes. These facilities typically employ powered industrial trucks, overhead and gantry ...
Read More →
KTA Podcast #1 – Inorganic vs. Organic Zinc Rich Primers
January 22, 2018
Ken Trimber (KTA President) moderates as Bill Corbett (KTA COO) and Jim Machen (KTA Sr. Coatings Consultant) debate the merits of using inorganic vs. organic ...
Read More →