Skip to content

Search...

Services
About Us
KTA University
Shop KTAGage.com
Careers

CONTACT US

Search...

Services
About Us
KTA University
Shop KTAGage.com
Careers

CA Water Service Group Quiz 2

By Brian Ferris / September 19, 2024

Time limit: 0

Quiz Summary

0 of 25 Questions completed

Questions:

Information

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 25 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

Current
Review
Answered
Correct
Incorrect

Question 1 of 25

1. Question
The mixing and thinning instructions, volume solids content and curing schedule for a coating are located on the:
- A. Safety Data Sheet (SDS)
- B. The paint can lid
- C. The Product Data Sheet (PDS)
- D. The batch analysis
Correct

Incorrect
Question 2 of 25

2. Question
Some multiple component coatings require an induction period, which:
- A. Is also known as “sweat-in” or “digestion” time
- B. When the components of the coating chemically blend
- C. Part of the pot life, but not the “usable” pot life
- D. All of the above
Correct

Incorrect
Question 3 of 25

3. Question
Shelf life is:
- A. The period of time that an opened product can be stored and used (from the date of manufacture)
- B. The period of time that an unopened coating product can be stored and used (from the date of manufacture)
- C. The period of time that a multiple component product can be mixed, then stored and used (from the date of manufacture)
- D. Same as the pot life
Correct

Incorrect
Question 4 of 25

4. Question
The information provided by the manufacturer’s PDS (product data sheet):
- A. Is carefully regulated by SSPC and ASTM
- B. Requires a uniform format containing specific information
- C. Lists any information a coating manufacturer decides to list in the format of their own choosing
- D. Is primarily a marketing brochure and has little field value
Correct

Incorrect
Question 5 of 25

5. Question
When there is conflicting information between the specification and the PDS (product data sheet, the:
- A. Specification is the governing document
- B. PDS is the governing document
- C. Contractor can choose to follow the specification or the PDS, provided they document the choice
Correct

Incorrect
Question 6 of 25

6. Question
A material receipt inspection involves:
- A. Opening the products to examine the condition
- B. Conducting tests to verify initial color and gloss
- C. Verifying that the products ordered for the job were the products received on the jobsite
Correct

Incorrect
Question 7 of 25

7. Question
When measuring ambient conditions, it is important to verify that the temperature of the surface is:
- A. At least 5°F higher than the dew point temperature
- B. The same temperature as the dew point temperature
- C. 5°F lower than the dew point temperature
- D. 5°F higher than the air temperature
Correct

Incorrect
Question 8 of 25

8. Question
Dew point is:
- A. The amount of moisture in the air
- B. The difference between the wet and dry bulb thermometers
- C. The temperature at which the air is completely saturated
- D. The temperature at which moisture from the air condenses on a surface
Correct

Incorrect
Question 9 of 25

9. Question
Relative humidity is:
- A. The amount of moisture in the air
- B. The difference between the wet and dry bulb thermometers
- C. The temperature at which the air is completely saturated
- D. The temperature at which moisture from the air condenses on a surface
Correct

Incorrect
Question 10 of 25

10. Question
The air temperature is 82^oF and the wet bulb temperature is 60^oF. The two values used to look-up the relative humidity in the Psychrometric Tables are:
- A. 82 and 60
- B. 82 and 142
- C. 60 and 22
- D. 82 and 22
Correct

Incorrect
Question 11 of 25

11. Question
Material heating requirements for plural component spray are found:
- A. On the plural component spray rig
- B. On the coating manufacturer’s instructions
- C. On the can labels
- D. Plural component spray doesn’t use heat to reduce viscosity. Thinner must be used.
Correct

Incorrect
Question 12 of 25

12. Question
A limitation to roller application is:
- A. It may require multiple applications to build the coating to the correct thickness
- B. It does not produce a smooth film
- C. Nap may become lodged in the dry film
- D. All of the above
Correct

Incorrect
Question 13 of 25

13. Question
If SSPC-PA2 is specified for dry film thickness measurement and a non-conforming area is found, which of the following statements is true:
- A. Measure in 6 directions radiating out from the non-conforming area until 2 consecutive 100 square foot areas conform to the specification.
- B. Measure in 6 directions radiating out from the non-conforming area until 5 consecutive spots conform to the specification, up to the area coated during the work shift.
- C. Measure in 8 directions radiating out from the non-conforming area until 3 consecutive 100 square foot areas conform to the specification.
- D. Measure in 8 directions radiating out from the non-conforming area until 2 consecutive spots conform to the specification, up to the area coated during the work shift.
Correct

Incorrect
Question 14 of 25

14. Question
If SSPC-PA2 is specified for dry film thickness measurement and there is 20,000 square feet of coated surface, how many spot measurements are necessary?
- A. 22
- B. 110
- C. 20
- D. 330
Correct

Incorrect
Question 15 of 25

15. Question
If SSPC-PA2 is specified for dry film thickness measurement and there is 20,000 square feet of the coated surface, how many areas must be measured?
- A. 22
- B. 3
- C. 19
- D. 5
Correct

Incorrect
Question 16 of 25

16. Question
If SSPC-PA2 is specified for dry film thickness measurement and there is 20,000 square feet of the coated surface, what is the minimum number of gage readings that must be obtained?
- A. 22
- B. 110
- C. 330
- D. 3
Correct

Incorrect
Question 17 of 25

17. Question
The specified coating thickness is 5-7 mils. SSPC-PA2 coating thickness standard is invoked by the specification and Coating Thickness Restriction Level 3 (default) is required. What is the tolerance of the spot measurements?
- A. 5-7 mils
- B. 4-8.4 mils
- C. 5-9 mils
- D. 4-10 mils
Correct

Incorrect
Question 18 of 25

18. Question
Which of the following statements regarding low voltage wet sponge pinhole testing is false?
- A. Requires a wetting agent for coating thicknesses in excess of 10 mils
- B. Can only be performed on non-conductive coatings
- C. The wand is traversed at a rate of 2 feet per second
- D. Is not recommended between coats
Correct

Incorrect
Question 19 of 25

19. Question
Which of the following is not associated with plural component spray?
- A. Coating temperature
- B. Component ratio
- C. Induction time
- D. Internal mix
Correct

Incorrect
Question 20 of 25

20. Question
The output pressure of a 45:1 airless spray pump when the regulator is set at 60 psi is:
- A. 60 psi
- B. 4500 psi
- C. 1800 psi
- D. 2700 psi
Correct

Incorrect
Question 21 of 25

21. Question
One day after the application of an epoxy primer you notice a pale-yellow haze on the surface of the coating that is somewhat oily. What do you suspect occurred?
- A. There was water in the compressed air used to operate the airless spray pump
- B. Oil got splashed onto the coating overnight
- C. Cool damp/high humidity overnight conditions caused an amine blush to form
- D. The coating was mis-mixed
Correct

Incorrect
Question 22 of 25

22. Question
Calculate the test voltage for performing high voltage holiday detection based on a coating that is 36 mils thick.

Note: K*√ T, where T = coating thickness and K = 525 for coatings < 40 mils thick, or 1250 for coatings > 40 mils thick
- A. 3,150 volts
- B. 18,900 volts
- C. 7,500 volts
- D. Should use low voltage pinhole detection for this coating thickness
Correct

Incorrect
Question 23 of 25

23. Question
Which of the following statements is TRUE regarding holiday/pinhole detection?
- A. Used on nonconductive coatings applied to nonconductive substrates
- B. Used on nonconductive coatings applied to conductive substrates
- C. Used on conductive coatings applied to conductive substrates
- D. Used on conductive coatings applied to nonconductive substrates
Correct

Incorrect
Question 24 of 25

24. Question
Which of the following statements is FALSE for conventional (air) spray?
- A. There are two regulators on the pressure pot
- B. Use of clean, dry compressed air is important
- C. The applicator has a lot of control
- D. Proper gun-to-surface distance is 12-18 inches
Correct

Incorrect
Question 25 of 25

25. Question
What is the proper procedure when mixing a zinc-rich primer?
- A. Pour the liquid into the zinc powder component
- B. Cast the zinc powder into the liquid after it is applied to the surface, but before it dries
- C. Slowly pour the liquid into the zinc powder component while under agitation
- D. Slowly sift the zinc powder into the liquid component(s) while under agitation
Correct

Incorrect

Quiz Summary

Information

Results

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question

11. Question

12. Question

13. Question

14. Question

15. Question

16. Question

17. Question

18. Question

19. Question

20. Question

21. Question

22. Question

23. Question

24. Question

25. Question